Marker

Mark position for the securing bolt

Mark the position where the holes align

Mark the position for the flange

Measuring Tape

PVC Reducer Bushing

PVC Tee Coupling

Drill

Drill a hole for the securing bolt

Fix flange to the wall

Drill Bit

Work Gloves

Carriage Bolt

Threaded Pipe

Attach PVC couplings and threaded pipe

Super Glue

Glue the pipe insulation to the coupling

Pipe Insulation

Scissors

Threaded Flange

Screws

Screw Anchors

A clean bike is a happy bike. This guide shows how to build a wall mounted bicycle repair stand. All the parts can be found online or at local hardware store.

Make a mark on the Tee Coupling at 3/4 of the height of the Reducer Busing to indicate the position for the securing bolt.

Attach both Couplings and make a hole on the Securing Bolt mark. Make sure the hole goes through both couplings.

Insert the Securing Bolt and mark the position where the couplings are aligned. This mark will help mount the bicycle without struggling to find where the holes align.

Insert the Threaded Pipe into the Reducer Busing and turn clockwise.

Cut a piece of Pipe Insulation slightly larger than the Tee Coupling, apply Super Glue, insert it and allow for the glue bond.

Choose a location to install your wall mount. Look for a place where you can move freely, with good light, and close to a water hose. Select a height that allows you to align the bike's crankset between your chest and belly button.

Drill the Flange holes, insert Screw Anchors and attach Flange into place.

Attach the wall mount by screwing the Pipe clockwise into the Flange.

Attach Pipe to Flange

Remove the seat post from the bicycle, slide it into the Tee coupling and then secure it back into the frame. Attach the bike to the wall mount and insert the securing bolt to prevent the bicycle from falling.

Build a Bicycle Wall Mount

Supplies

Tools

Questions & Answers